Cisco Systems 3825 manual Show umts-iub errors, Example, 104

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

show umts-iub errors

show umts-iub errors

To display the error statistics of the UMTS Iub interface, use the show umts-iub errors command in privileged EXEC mode.

show umts-iub errors

Syntax Description This command has no arguments or keywords.

Command Modes

Command History

Privileged EXEC

ReleaseModification

12.4(2)MR This command was introduced.

Examples The following are examples of the output generated by this command.

Example 1:

Receiving traffic from shorthaul when the peering connection is not connected with the remote router yet.

Router# show umts errors atm 0/0/1

UMTS-Iub(ATM0/0/1): backhaul_peer_not_ready ========= 5

5 is the number of packets received from shorthaul.

Example 2

The peering connection is up and shorthaul is receiving traffic from a pvc that's NOT configured on the remote peering router’s shorthaul.

Router# show umts errors atm 0/0/1

UMTS-Iub(ATM0/0/1): no_remote_pvc =============== 5

5 is also the number of packets.

Example 3

Error statistics that the code keeps track of if the number is not zero.

Router# show umts errors

UMTS-Iub(ATM1/1/1): backhaul_peer_not_ready ===== 6

UMTS-Iub(ATM1/1/1): no_remote_pvc =============== 6

UMTS-Iub(ATM1/1/1): backhaul_invalid_pak ======== 1

UMTS-Iub(ATM1/1/1): decompression_failures ====== 1

UMTS-Iub(ATM1/1/1): no_shorthaul_pak_available == 1

UMTS-Iub(ATM1/1/1): compression_failures ======== 1

UMTS-Iub(ATM1/1/1): no_backhaul_pak_available === 1

UMTS-Iub(ATM1/1/1): no_backhaul_interface ======= 1

UMTS-Iub(ATM1/1/1): backhaul_interface_down ===== 1

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-104	OL-15667-03