Cisco Systems 3825 manual Behavior Changes, Remote PVCs PVC1/200 has, Local PVC

Chapter 1 Overview of the Cisco 3825 Mobile Wireless Edge Router

New Features in Cisco IOS Release 12.4(16)MR

UMTS-Iub(ATM0/IMA0.1): PVC matching

Peering state: OPEN
Local PVCs:
PVC(1/200): has	MATCHING	remote PVC.
Remote PVCs:
PVC(1/200): has	MATCHING	local PVC.

Lisa#show umts packet UMTS-Iub(ATM0/IMA0): packets:

rxUMTS_count ================ 468845 txUMTS_count ================ 276847 rxUMTS_bytes ================ 22504560 txUMTS_bytes ================ 13288656 rxBackhaul_packets ========== 58216 txBackhaul_packets ========== 88884 rxBackhaul_bytes ============ 14687104 txBackhaul_bytes ============ 24824360 Last cleared 00:50:39

UMTS-Iub(ATM0/IMA0.1): packets: rxUMTS_count ================ 126173 txUMTS_count ================ 126173 rxUMTS_bytes ================ 6056304 txUMTS_bytes ================ 6056304 rxBackhaul_packets ========== 28405 txBackhaul_packets ========== 28777 rxBackhaul_bytes ============ 6532571 txBackhaul_bytes ============ 7596968 Last cleared 00:08:08

Behavior Changes

The following behavior changes will be apparent when using this PVC Routing feature.

1.When the no atm umts command is applied to a base ATM interface, the command will un-configure the ATM UMTS mode for all the sub-interfaces under that ATM interface.

2.When the no atm umts command is applied to an ATM sub-interface, the command will un-configure the ATM UMTS mode only for that sub-interface.

3.Alarms are carried over the primary backhaul only, while the primary peering will have the alarm information. The following is a sample output:

UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Peering Information
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Local (20.20.20.21:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Connect State: OPEN
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/0/0): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/0/1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Remote (20.20.20.20:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0):	Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/0/0):	RX(NO ALARM)	TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/0/1):	RX(NO ALARM)	TX(NO ALARM)

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
1-32	OL-15667-03