Cisco Systems 3825 manual Slot and Port Numbering, Serial 0/0/0 Hwic slot Serial 1/0/0 NM slot

Chapter 3 First-Time Configuration

Understanding the Cisco 3825 Router Interface Numbering

Figure 3-1 Cisco 3825 Router Slot and Port Numbers

NMD- ESW- 36

Network module		Removable	Console	Gigabit Ethernet
(NME) slot 2		face plate	port	(GIGE) ports
				GE 0/0
				GE 0/1
35x
GE1
10/100/	FastEthernet	Ports
Base-Tx1000 17x

280205

Network module	High-speed WIC			Auxiliary	Small Form Pluggable
(NME) slot 1		(HWIC) slots		port	(SFP) port
		HWIC3	HWIC2
		HWIC1	HWIC0

Slot and Port Numbering

The Cisco 3825 router chassis contains the following LAN and WAN interface types:

•One Small Form Pulggable (SFP) port—industry standard Gigabit interface convertor

•Two built-in Gigabit Ethernet LAN interfaces (labeled GE 0/0 and GE 0/1)

•Four slots for installing Cisco 2-port T1/E1-RAN interface cards (labeled HWIC0, HWIC1, HWIC2, and HWIC3)

•Two slots for installing NM-2W network modules (supports up to four additional Cisco 2-port T1/E1-RAN interface cards)

Note A removable face plate allows for installation of a double-wide NMD network module into NME slot 2.

The logical slot numbers are as follows:

•0 for all built-in Cisco 2-port T1/E1-RAN interface card slots

•1 for the lower network module slot

•2 for the upper network module slot

The numbering format is:

<Interface type> <Slot number> / <Subslot number> / <Port number> For example:

Serial 0/0/0 (HWIC slot 0)

Serial 1/0/0 (NM slot 1)

Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide

3-2 OL-15667-03