A-114
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show xconnect all
The following example shows show xconnect all command output in the detailed display format:
Router# show xconnect all detail
Legend: XC ST=Xconnect State, S1=Segment1 State, S2=Segment2 State
UP=Up, DN=Down, AD=Admin Down, IA=Inactive, NH=No HardwareXC
ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP ac Et0/0(Ethernet) UP mpls 10.55.55.2:1000 UP
Interworking: ip Local VC label 16
Remote VC label 16
pw-class: mpls-ip
UP ac Et1/0.1:200(Eth VLAN) UP mpls 10.55.55.2:5200 UP
Interworking: ip Local VC label 17
Remote VC label 20
pw-class: mpls-ip
IA pri ac Et1/0.2:100(Eth VLAN) UP ac Et2/0.2:100(Eth VLAN) UP
Interworking: none Interworking: none
UP sec ac Et1/0.2:100(Eth VLAN) UP mpls 10.55.55.3:1101 UP
Interworking: none Local VC label 23
Remote VC label 17
pw-class: mpls
The additional fields displayed in the detailed output are self-explanatory.
Related Commands
S1
or
S2
State of the segment. Valid states are:
• UP—The segment is up.
• DN—The segment is down.
• AD—The segment is administratively down.
Table A-6 show xconnect all Field Descriptions (continued)
Field Description
Command Description
show atm pvc Displays all ATM PVCs and traffic information.
show atm vc Displays all ATM PVCs and SVCs and traffic information.
show atm vp Displays the statistics for all VPs on an interface or for a specific VP.
show connect Displays configuration information about drop-and-insert
connections that have been configured on a router.
show frame-relay pvc Displays statistics about PVCs for Frame Relay interfaces.
show interfaces Displays statistics for all interfaces configured on the router or access
server.
show l2tun session Displays the current state of Layer 2 sessions and protocol
information about L2TP control channels.
show mpls l2transport
binding
Displays VC label binding information.
show mpls l2transport vc Displays information about AToM VCs that have been enabled to
route Layer 2 packets on a router.