Cisco Systems 3825 Redundancy, Following example enables redundancy mode, Invokes y-cable mode

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

redundancy

redundancy

Syntax Description

Defaults

Command Modes

Command History

To access the command mode that allows you to configure aspects of redundancy, use the redundancy command in global configuration mode.

redundancy

This command has no parameters; it invokes the redundancy mode.

There are no default settings or behaviors.

Global configuration

Release	Modification
12.2(8)MC2	This command was introduced.
12.2(15)MC1	This command was incorporated.
12.3(11)T	This command was incorporated.
12.4(2)MR	This command was incorporated.

Examples	The following example enables redundancy mode:
	Router(config)# redundancy
	Router(config-r)
Related Commands	Command	Description
	mode y-cable	Invokes y-cable mode.
	standalone	Indicates whether the Cisco 3825 router is being used as a standalone
		device and manually sets the relays.
	standby use-interface	Designates a loopback interface as a health or revertive interfaces.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-68	OL-15667-03