Cisco Systems 3825 manual Mode y-cable, Standalone, Standby use-interface, Redundancy

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

mode y-cable

mode y-cable

Syntax Description

Defaults

Command Modes

Command History

To access the command mode that allows you to manually control the relays on the voice/WAN interface card (VWIC) or high-speed WAN interface card (HWIC), use the mode y-cablecommand in redundancy configuration mode.

mode y-cable

This command has no parameters, it invokes the y-cable mode.

There are no default settings or behaviors.

Redundancy configuration

Release	Modification
12.2(8)MC2	This command was introduced.
12.2(15)MC1	This command was incorporated.
12.3(11)T	This command was incorporated.
12.4(2)MR	This command was incorporated.

Examples	The following example enables y-cable mode:
	Router(config)# redundancy
	Router(config-r)# mode y-cable
Related Commands	Command	Description
	standalone	Indicates whether the Cisco 3825 router is being used as a standalone
		device and manually sets the relays.
	standby use-interface	Designates a loopback interface as a health or revertive interface.
	redundancy	Invokes redundancy mode.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-62	OL-15667-03