A-107
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show umts-iub peering
show umts-iub peering
To display the peering status, statistics, and history of the UMTS Iub interface, use the show umts-iub
peering command in privileged EXEC mode.
show umts-iub peering [details]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following are examples of the output generated by this command.
Example 1
Router# show umts peering atm 0/0/1
UMTS-Iub(ATM0/0/1): Peering Information
UMTS-Iub(ATM0/0/1): Local (40.40.40.40:6666) States:
UMTS-Iub(ATM0/0/1): Connect State: OPEN
UMTS-Iub(ATM0/0/1): Redundancy State: ACTIVE
UMTS-Iub(ATM0/0/1): Alarm State: RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1):Version: 1
UMTS-Iub(ATM0/0/1): Remote (40.40.40.41:6666) States:
UMTS-Iub(ATM0/0/1): Alarm State: RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1): Version: 1
Example 2
Router# show umts peering detail atm 0/0/1
UMTS-Iub(ATM0/0/1): Peering Information (Version 1)
05/15/02 02:35:50 AM: BACKHAUL UP INIT --> CLOSED
05/15/02 02:35:50 AM: OPEN CLOSED --> CON_SENT
05/15/02 02:35:50 AM: CLOSE CON_SENT --> CLOSING
05/15/02 02:35:50 AM: OPEN CLOSING --> STOPPING
05/15/02 02:35:59 AM: TIMEOUT- STOPPING --> STOPPED
05/15/02 02:36:28 AM: OPEN STOPPED --> CON_SENT
05/15/02 02:36:28 AM: RCR+ CON_SENT --> ACK_SENT
05/15/02 02:36:28 AM: RCA ACK_SENT --> OPEN
03/01/02 12:00:37 AM: Local RX(NOT AVAILABLE) TX(NOT AVAILABLE), Remote RX(NOT
AVAILABLE) TX(NOT AVAILABLE)
05/15/02 02:35:52 AM: Local RX(NO ALARM ) TX(NO ALARM ), Remote RX(NOT
AVAILABLE) TX(NOT AVAILABLE)
05/15/02 02:36:28 AM: Local RX(NO ALARM ) TX(NO ALARM ), Remote RX(NO ALARM
) TX(NO ALARM )
details Provides detail information about peering.
Release Modification
12.4(2)MR This command was introduced.
12.4(4)MR This command added IMA in the output, how traffic for a PVC is off loaded
to an alternate backhaul, and how alarms are carried over primary backhaul.