Cisco Systems 3825 manual Configuration Sequence

Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line

Configuration Sequence

•version—(Optional) Version of the SNMP used to send the traps. Version 3 is the most secure model, as it allows packet encryption with the priv keyword. If you use the version keyword, one of the following must be specified:

–1—SNMPv1. This option is not available with informs.

–2c—SNMPv2C.

–3—SNMPv3. The following three optional keywords can follow the version 3 keyword:

–auth(Optional). Enables Message Digest 5 (MD5) and Secure Hash Algorithm (SHA) packet authentication

–noauth(Default). The noAuthNoPriv security level. This is the default if the [auth noauth priv] keyword choice is not specified.

–priv(Optional). Enables Data Encryption Standard (DES) packet encryption (also called “privacy”).

•community-string—Password-like community string sent with the notification operation. Though you can set this string using the snmp-server host command by itself, we recommend you define this string using the snmp-server community command before using the snmp-server host command.

•udp-portport—UDP port of the host to use. The default is 162.

•notification-type—(Optional) Type of notification to be sent to the host. If no type is specified, all notifications are sent. The notification type can be one or more of the following keywords:

–aaa_server—Enable SNMP AAA Server traps.

–atm—Enable SNMP atm Server traps.

–ccme—Enable SNMP ccme traps.

–cnpd—Enable NBAR Protocol Discovery traps.

–config—Enable SNMP config traps.

–config-copy—Enable SNMP config-copy traps.

–cpu—Allow cpu related traps.

–dial—Enable SNMP dial control traps.

–dnis—Enable SNMP DNIS traps.

–ds0-busyout—Enable ds0-busyout traps.

–ds1—Enable SNMP DS1 traps.

–ds1-loopback—Enable ds1-loopback traps.

–ds3—Enable SNMP DS3 traps.

–dsp—Enable SNMP dsp traps.

–eigrp—Enable SNMP EIGRP traps.

–entity—Enable SNMP entity traps.

–envmon—Enable SNMP environmental monitor traps.

–flash—Enable SNMP FLASH notifications.

–frame-relay—Enable SNMP frame-relay traps.

–hsrp—Enable SNMP HSRP traps.

–icsudsu—Enable SNMP ICSUDSU traps.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
4-36	OL-15667-03