Broadband ATM services supported configurations

ATM cell test

interfaces

Option UKN1

Page 8

ATM cell generation and

analysis: 2, 34 and 140 Mb/s (includes all capability of option UKJ structured PDH).

Option UKZ2Page 8

Generation and measurement of ATM payloads: 1.544 (DS1), 44.736 (DS3), 2.048 (E1) and 34.368 (E3) Mb/s.

1ITU-T

2ANSI/ITU-T

ATM services

layer test

Option 0YK Page 9

Adds Channel View, graphical display of CDV, AAL analysis, rate history, benchmark traffic generation. Must also order option UKN or UKZ,

Option USL

Page 9

Adds Ethernet LAN

 

connectivity testing plus all features of option 0YK. Must also order option UKN or UKZ.

STM-1e test

and interfaces

Option A1T Page 8

STM-1e (155 Mb/s) electrical interface. Overhead access, thru mode and pointer sequences. TU-12, TU-2, VC-3 and VC-4 mappings. (Provides STM-1o output when option UKN and optical interface option are selected. STM-1o and OC-3c are provided when option UKZ and an optical interface option are selected).

Optical

interfaces

Option UH1

Page 10

155 Mb/s (1310 nm).

Option USN

Page 10

622/155 Mb/s (1310 and

1550 nm), optical power

measurement.

 

Option UKT

Page 10

622/155 Mb/s (1310 nm), optical power measurement.

Jitter, wander and slips

testing – generation*

Option A3K Page 9

PDH, 155 Mb/s, 622 Mb/s jitter and wander generation.

Option 140 Page 9

As option A3K but without wander generation.

Jitter, wander and slips testing – measurement*

Option UHN

Page 9

PDH jitter measurement.

Option A3L

Page 9

155 Mb/s electrical and PDH jitter measurement.

Option A3V Page 9

155 Mb/s optical, electrical and PDH jitter measurement.

Option A3N Page 9

622 Mb/s, 155 Mb/s optical, electrical and PDH jitter.

† Where specified two modules may be ordered from certain categories (ie. UH3, UHC, 0YH).

*NB Jitter generation and measurement does not include DS1, DS3 and 52 Mb/s. PDH jitter depends on options fitted. If option UKK/UKJ/UKN fitted then PDH jitter generation and measurement is provided at E1/E2/E3/E4.

If option 110 fitted then PDH jitter generation and measurement capability is provided at E1 and E3. 622 Mb/s

and 155 Mb/s jitter presented in ITU-T terminology as is specified in the HP 37717B/C communications performance analyzer technical specifications (publication number 5966-0892E).

For compliance to Bellcore standards, please contact you local Hewlett-Packard representative for details.

Please contact your local sales office if you require module interworking capability not specified here.

All modules work with UKX (printer), A3B/A3D (remote control) and USS (distributed network analyzer software).

7