Cisco Systems 3825 manual Interface atm ima, Ima-group, Ima group-id

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

interface atm ima

interface atm ima

To configure an ATM IMA group and enter interface configurations mode, use the interface atm ima global configuration command. If the group does not exist when the command is issued, the command automatically creates the group.

interface atm slot/ima<group-number>

Syntax Description	slot	Specifies the slot location of the ATM IMA port adapter.
	group-number	Specifies an IMA group number from 0 to 3. You can create up to four
		groups.
Defaults	By default there are no IMA groups, only individual ATM links.

Command Modes

Command History

Global configuration

Release	Modification
12.0(5)XE	This command was introduced.
12.4(4)MR	This command was incorporated.

Usage Guidelines

Examples

When a port is configured for IMA functionality, it no longer operates as an individual ATM link. Specifying ATM links as members of a group using the ima-group interface command does not enable the group. You must use the interface atm slot/ima<group-number> command to create the group.

The following example shows the how to create the IMA group:

Router(config)# interface ATM0/IMA0

Router(config-if)# no ip address

Related Commands	Command	Description
	ima-group	Configures the physical links as IMA group members; execute this
		interface configuration command for each physical link that you
		include in an IMA group.
	ima group-id	Enables the user to configure the IMA Group ID for the IMA
		interface.
	interface atm	Configures physical links for ATM.
	show ima interface atm	Displays general and detailed information about IMA groups and the
		links they include.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03		A-37