Cisco Systems manual Show Commands for Monitoring the Cisco 3825 Router, Command Purpose

Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line

Monitoring and Managing the Cisco 3825 Router

Show Commands for Monitoring the Cisco 3825 Router

To monitor and maintain the Cisco 3825 router, use the following commands:

	Command	Purpose
	show atm cell-packing	Displays information about Layer 2 transport
		ATM cell-packing.
	show cem circuit	Displays summary information about the CEM
		circuit state, including controller, interface and
		AC.
		Displays specific CEM circuit state, circuit
		parameters and statistics/counters in detail.
	show cem platform	Displays CEM errors and information.
	show controllers	Displays all network modules and their interfaces.
		Displays the status of the VWIC/HWIC relays
		when a VWIC or HWIC is installed.
	show controllers e1	Displays information about the controller status
		specific to the controller hardware. It also displays
		statistics about the E1 link. If you specify a slot
		and a port number, statistics for each 15 minute
		period will be displayed.
	show controllers fastethernet slot/port	Displays information about initialization block,
		transmit ring, receive ring and errors for the Fast
		Ethernet controller chip.
	show controllers gigabitethernet slot/subslot/port	Displays information about initialization block,
		transmit ring, receive ring, and errors for Gigabit
		Ethernet interface controllers.
	show controllers t1	Displays information about the cable length,
		framing, firmware, and errors associated with the
		T1. With the Cisco 3825 router, this command
		also displays the status of the relays on the
		VWIC/HWIC.
	show gsm traffic	Displays traffic rates, in bits per second, at 1
		second, 5 seconds, 1 minute, 5 minutes, and 1 hour
		intervals for GSM data transmitted and received
		over the backhaul.
	show gsm-abis efficiency [history]	Displays the history of the GSM efficiency
		averages for compression/decompression at
		1-second, 5-second, 1-minute, 5-minute, and
		1-hour intervals.
	show gsm-abis errors	Displays error statistics counters of the GSM for
		compression/decompression.
	show gsm-abis packets	Displays packet statistics counters of the GSM for
		compression/decompression.
	show gsm-abis peering [details]	Displays peering status, statistics, and history of
		the GSM compression/decompression.
	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03			4-71