Cisco Systems 3825 Ppp multilink, Interface GigabitEthernet0/1, Interface Serial0/0/10, Pvc 1/33

Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line

Saving Configuration Changes

ppp multilink

ppp multilink interleave ppp multilink group 1

ppp multilink fragment delay 0 1 ppp multilink multiclass hold-queue 50 out max-reserved-bandwidth 100 service-policy output llq-policy

ip rtp header-compression ietf-format

!

interface GigabitEthernet0/0

description GE interface providing IP connectivity to MWTM server ip address W.X.Y.Z A.B.C.D

speed 1000 full-duplex

!

interface Serial0/0/0:0 no ip address

no keepalive

description GSM Abis interface encapsulation gsm-abis

gsm-abis local 172.168.1.1 3334 !--- Port numbers must be even gsm-abis remote 172.168.1.2 3334 !--- Port numbers must be even

!

interface GigabitEthernet0/1

no ip address shutdown duplex auto speed auto

!

interface Serial0/0/1:0

no ip address no keepalive

description GSM Abis interface encapsulation gsm-abis gsm-abis local 172.168.1.1 3336 gsm-abis remote 172.168.1.2 3336

!

interface Serial0/1/0:0 no ip address

description IP backhaul MLPPP member interface encapsulation ppp

ppp multilink group 1 max-reserved-bandwidth 100

!

interface ATM0/1/1

	no ip address
	description Default E1 Iub interface configuration
	scrambling-payload
	no atm ilmi-keepalive
	atm umts-iub
	umts-iub local 172.168.1.1 6000
	umts-iub remote 172.168.1.2 6000
	pvc 1/32 !--- PVCs needed will vary
	encapsulation aal0
	!
	pvc 1/33
	encapsulation aal0
	!
	pvc 1/34
	encapsulation aal0
	!
	pvc 1/35
	encapsulation aal0
	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03		4-67