Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

show mpls l2transport vc

Release

Modification

12.2(17d)SXB

Support for this command on the Supervisor Engine 2 was extended to Release

 

12.2 SX.

 

 

12.2(25)S

This command was updated with new output and fields for nonstop forwarding

 

(NSF), stateful switchover (SSO), and graceful restart (GR) abilities.

 

 

12.2(28)SB

This command was implemented on the Cisco 10000 series routers.

 

Example output was changed for the Cisco 10000 series router, and two fields

 

(SSO Descriptor and SSM segment/switch IDs) were removed from the output

 

because they are not supported.

 

 

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

 

 

12.4(16)MR

This command was integrated into Cisco IOS Release 12.4(16)MR.

 

 

Usage Guidelines If you do not specify any keywords or arguments, the command displays a summary of all the VCs.

Examples

The output of the commands varies, depending on the type of Layer 2 packets being transported over the

 

AToM VCs.

 

 

 

 

 

The following sample output shows information about the interfaces and VCs that have been configured

 

to transport various Layer 2 packets on the router:

 

 

 

Router# show mpls l2transport vc

 

 

 

 

Local intf

Local circuit

Dest address

VC ID

Status

 

-------------

------------------

---------------

----------

----------

 

AT4/0

ATM AAL5 0/100

10.0.0.1

100

UP

 

AT4/0

ATM AAL5 0/200

10.0.0.1

200

UP

 

AT4/0.300

ATM AAL5 0/300

10.0.0.1

300

UP

Table A-4describes the significant fields shown in the display.

Table A-4

show mpls l2transport vc Field Descriptions

 

 

 

Field

 

Description

 

 

 

Local intf

 

The interface on the local router that has been enabled to transport Layer 2

 

 

packets.

 

 

 

Local circuit

 

The type and number (if applicable) of the local circuit. The output shown in this

 

 

column varies, depending on the transport type:

 

 

For ATM cell relay and AAL5, the output shows the VPI/VCI of the PVC.

 

 

For Ethernet VLANs, the output shows the VLAN number.

 

 

 

Dest address

 

The IP address of the remote router's interface that is the other end of the VC.

 

 

 

VC ID

 

The VC identifier assigned to one of the interfaces on the router.

 

 

 

 

Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide

A-96

OL-15667-03

Page 228
Image 228
Cisco Systems 3825 manual Vc Id