Cisco Systems 3825 manual Show l2tp session

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

show l2tp session

show l2tp session

To display basic information about all active L2TP sessions, use the show l2tp session command in the user EXEC mode.

show l2tp session

Syntax Description This command has no arguments or keywords.

Command Modes

Command History

User EXEC

Release	Modification
12.1(1)T	This command was enhanced to display Point-to-Point Protocol over
	Ethernet (PPPoE) information.
12.1(2)T	This command was enhanced to display PPPoE session information on
	actual Ethernet interfaces.
12.4(12)MR2	This command was integrated into Cisco IOS Release 12.4(12)MR2.

Usage Guidelines Use the show l2tp session command to display information about all active sessions using L2TP.

Examples			The following is sample output from the show l2tp session command on a device with active L2TP
			sessions:
			Router# show l2tp session
			L2TP Session Information Total tunnels 1 sessions 4
			LocID	RemID	TunID	Username, Intf/	State	Last Chg Uniq ID
						Vcid, Circuit
		9547		61932	2220	100, AT0/0:	est	2w6d	1
		9580		61966	2220	1100, AT0/1:0/100	est	2w6d	21
		9584		61970	2220	1200, AT0/1.1:	est	2w6d	29
		9595		61981	2220	1101, AT0/1:0/101	est	1w0d	37
			Router#
Related Commands			Command			Description
			show l2tp domain			Displays all VPDN domains and DNIS groups configured on the NAS.
			show l2tp group			Displays a summary of the relationships among VPDN groups and
						customer/VPDN profiles, or summarizes the configuration of a VPDN
						group including DNIS/domain, load sharing information and current
						session information.
			show l2tp history failure			Displays the content of the failure history table.
			show l2tp multilink			Displays the multilink sessions authorized for all VPDN groups.
						Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
	OL-15667-03									A-91