Cisco Systems 3825 Enter a hostname for the router this example uses, Viewing the configuration

Chapter 3 First-Time Configuration

Configuring Global Parameters

Step 3	Enter a hostname for the router (this example uses 3825-1):
	Configuring global parameters:
	Enter host name [Router]: 3825-1
Step 4	Enter an enable secret password. This password is encrypted (more secure) and cannot be seen when
	viewing the configuration:
	The enable secret is a password used to protect access to
	privileged EXEC and configuration modes. This password, after
	entered, becomes encrypted in the configuration.
	Enter enable secret: ciscoenable
Note	When you enter the enable secret password, it will be seen while you type the password. After entering
	it, it becomes encrypted in the configuration.
Step 5	Enter an enable password that is different from the enable secret password. This password is not
	encrypted (less secure) and can be seen when viewing the configuration:
	The enable password is used when you do not specify an
	enable secret password, with some older software versions, and
	some boot images.
	Enter enable password: ciscoenable
Step 6	Enter the virtual terminal password, which prevents unauthenticated access to the router through ports
	other than the console port:
	The virtual terminal password is used to protect
	access to the router over a network interface.
	Enter virtual terminal password: ciscoterminal
Step 7	Respond to the following prompts as appropriate for your network:
	Configure SNMP Network Management? [yes]:
	Community string [public]: public
Step 8	The summary of interfaces is displayed. This list varies, depending on what network modules, if any, are
	installed in your router.
	Current interface summary
	Any interface listed with OK? value “NO” does not have a valid configuration
	Interface	IP-Address	OK? Method Status	Protocol
	GigabitEthernet0/0	unassigned	NO unset up up
	GigabitEthernet0/1	unassigned	NO unset up up

Step 9 Specify the interface to be used to connect to the network management system.

Enter interface name used to connect to the

management network from the above interface summary: GigabitEthernet0/0

Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide

3-6 OL-15667-03