Cisco Systems 3825 manual Ipran-mib threshold-warning percent

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

ipran-mib threshold-warning

ipran-mib threshold-warning

Use the ipran-mibthreshold-warningcommand in the global configuration mode to specify a level of traffic where the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as “warning.”

All changes to this threshold take affect at the end of the current interval. The value for this object must be greater than the value specified for the ipran-mibthreshold-acceptablecommand keyword.

Also, the value for this object must be less than or equal to value of the cirbhBackHaulOverloadedThreshold object. This parameter corresponds to the cirbhBackHaulWarningThreshold object.

ipran-mibthreshold-warning[30-100 Utilization default (percent)]

Syntax Description

Defaults

Command Modes

Command History

ipran-mib	ipran-mib threshold-warning percent
threshold-warning

70 percent.

Interface configuration

ReleaseModification

12.4(2)MR1	This command was introduced.
12.4(9)MR	Support for utilization notification was removed. This command is supported to
	maintain compatibility.

Examples	Router# config t
	Router(config)# ipran-mib threshold-warning 60
	Router(config)# ipran-mib threshold-warning 80
	Router(config)# no ipran-mib threshold-warning
	Router(config)# exit
Related Commands
	Command	Description
	ipran-mib	Specifies the acceptable level of traffic.
	threshold-acceptable
	ipran-mib	Specifies the amount of traffic that indicates the backhaul is
	threshold-overloaded	overloaded.
	ipran-mib	Specifies the interval used to suppress the generation of utilization
	backhaul-notify-interval	notifications.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03		A-55