Cisco Systems 3825 Gsm-abis retransmit sample-delay, Gsm-abis local, Show gsm-abis packet

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

gsm-abis retransmit

gsm-abis retransmit

To enable retransmission of repetitive subrate sample, use the gsm-abis retransmit Interface configuration command. This command is useful when the latency introduced by the characteristics of the backhaul network is excessive. Examples are the use of satellite transmission facilities or multiple router hops on the backhaul network.

gsm-abis retransmit [sample-delay]

Syntax Description	sample-delay	The number of duplicate samples that must be observed before the duplicate
		sample will be retransmitted. The sample-delayin a range of 5 to 255 or 100
		to 5100 ms at 20 ms intervals.
Defaults	There are no default settings or behaviors.

Command Modes

Command History

Interface configuration

ReleaseModification

12.4(2)MR This command was introduced.

Examples	The following example shows how a retransmit delay of 100 ms:
	Router(config)# interface Serial10/1/0.0
	Router(config-if)# encapsulation gsm-abis
	Router(config-if)# gsm-abis local 10.10.10.1 5504
	Router(config-if)# gsm-abis remote 10.10.10.2 5504
	Router(config-if)# gsm-abis retransmit 5
Related Commands	Command	Description
	gsm-abis local	Configures the local parameters for an IP/UDP backhaul
		connection.
	gsm-abis remote	Configures the remote parameters for an IP/UDP backhaul
		connection.
	show gsm-abis packet	Displays packet statistics counters of the GSM
		compression/decompression.

show gsm-abis packet include retransmit

Displays packet statistics counters of the GSM compression/decompression to include the repetitive sub-rate samples retransmitted.

	Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03		A-33