A-54
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
ipran-mib threshold-overloaded
ipran-mib threshold-overloaded
Use the ipran-mib threshold-overloaded command in the global configuration mode to specify a level
of traffic where the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState
objects are marked as “overloaded.” Changes to this threshold take affect at the end of the current
interval. The value for this object must be greater than the value specified for the
cirbhBackHaulAcceptableThreshold object. Also, the value for this object must be greater than or equal
to value of the cirbhBackHaulWarningThreshold object.
ipran-mib threshold-overloaded [40-100 Utilization default (percent)]
Syntax Description
Defaults 80 percent.
Command Modes Interface configuration
Command History
Examples Router# config t
Router(config)# ipran-mib threshold-overloaded 60
Router(config)# ipran-mib threshold-overloaded 80
Router(config)# no ipran-mib threshold-warning
Router(config)# exit
Related Commands
ipran-mib
threshold-overload
ipran-mib threshold-overload percent
Release Modification
12.4(2)MR1 This command was introduced.
12.4(9)MR Support for utilization notification was removed. This command is supported to
maintain compatibility.
Command Description
ipran-mib
threshold-acceptable
Specifies the acceptable level of traffic.
ipran-mib
backhaul-notify-interval
Specifies the interval used to suppress the generation of utilization
notifications.
ipran-mib
threshold-warning
Specifies the amount of traffic that indicates the backhaul is carry ing
traffic sufficient to impact performance, but is not overloaded.