Cisco Systems 3825 manual Xconnect logging redundancy, Configuration mode, 136

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

xconnect logging redundancy

xconnect logging redundancy

Syntax Description

Defaults

Command Modes

Command History

To enable system message log (syslog) reporting of the status of the xconnect redundancy group, use the xconnect logging redundancy command in global configuration mode. To disable syslog reporting of the status of the xconnect redundancy group, use the no form of this command.

xconnect logging redundancy

no xconnect logging redundancy

This command has no arguments or keywords.

Syslog reporting of the status of the xconnect redundancy group is disabled.

Global configuration

Release	Modification
12.0(31)S	This command was introduced.
12.2(28)SB	This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(11)T	This command was integrated into Cisco IOS Release 12.4(11)T.
12.4(16)MR	This command was integrated into Cisco IOS Release 12.4(16)MR.

Usage Guidelines			Use this command to enable syslog reporting of the status of the xconnect redundancy group.
Examples			The following example enables syslog reporting of the status of the xconnect redundancy group and
			shows the messages that are generated during switchover events:
			Router# config t
			Router(config)# xconnect logging redundancy
			Router(config)# exit
			Activating the Primary Member
			00:01:07: %XCONNECT-5-REDUNDANCY: Activating primary member 10.55.55.2:1000
			Activating the Backup Member:
			00:01:05: %XCONNECT-5-REDUNDANCY: Activating secondary member 10.55.55.3:1001
Related Commands			Command	Description
			xconnect	Binds an Ethernet, 802.1q VLAN, or Frame Relay attachment circuit
				to an L2TPv3 PW for xconnect service and enters xconnect
				configuration mode.
		Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
	A-136			OL-15667-03