Cisco Systems 3825 manual First-Time Configuration Completing the Configuration

Chapter 3 First-Time Configuration

Completing the Configuration

If you answer no, the configuration information that you entered is not saved, and you return to the router enable prompt. Type setup to return to the System Configuration Dialog.

If you answer yes, the configuration is saved, and you return to the EXEC prompt.

Step 2 When the messages stop displaying on your screen, press Return to get the command line prompt.

The 3825-1>prompt indicates that you are now at the CLI and you have just completed a basic router configuration. However, this is not a complete configuration. You must configure additional parameters by using the Cisco IOS software CLI as described in Chapter 4, “Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line Interface.”

Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide

3-8 OL-15667-03