Cisco Systems 12000/10700 V3.1.1 manual Layer 3 Configuration Tab, OAM Information, VCL Config

Chapter 12 Managing ATM Connections

ATM PVC Configuration

OAM Information

The OAM Information area is not applicable to Cisco 12000/10720 Router Manager.

Layer 3 Configuration Tab

The Layer 3 Configuration tab (see Figure 12-26) contains the following areas:

•VCL Config

•Interface

•VCL Parameters

•VPI/VCI (including Auto Suggestion feature)

•Subscriber

•OAM Parameters

•Actions

VCL Config

The VCL Config area contains one field:

Encapsulation—The following values can be selected for this field:

•None—No encapsulation is selected.

•ILMI—Used for setting up an ILMI PVC in an SVC environment. In an SVC environment, you must configure a PVC for communication with the ILMI so that the router can receive SNMP traps and new network prefixes.

•Qsaal—This signaling PVC can only be set up on ATM main interfaces, not on ATM sub-interfaces.

Interface

The Interface area contains one field:

Sub-Interface Number—The subinterface number under which this PVC is deployed.

VCL Parameters

The VCL Parameters area contains the following fields:

AAL5 Encapsulation—Configure the ATM adaptation layer (AAL) 5 encapsulation type.

Destination IP Address—Enter the IP address of the destination interface to which you want to pass traffic.

Broadcast—Choose yes if you want to send duplicate broadcast packets for all protocols configured on a PVC.

VPI/VCI

The VPI/VCI area contains one field:

Auto Suggestion—If you enable auto suggestion, Cisco 12000/10720 Router Manager automatically suggests VPI or VCI values for you.

	Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01		12-35