Cisco Systems 12000/10700 V3.1.1 manual Interface Status, Interface Type

C H A P T E R 9

Interface Status

This chapter describes how to view status information for each of the interfaces on the Cisco device being managed using the Cisco 12000/10720 Router Manager application.

This chapter contains the following information:

•Interfaces and Related Technology-Specific Windows

•Launching the Interface Status Windows

•Generic Interface Status

•ATM Interface Status

•ATM Interface Faults

•DS3/E3 Interface Status

•SONET Interface Status

•SRP Interface Status

•SRP Side IPS Status

•SRP Topology Map

Interfaces and Related Technology-Specific Windows

Interfaces on line cards can support multiple technologies. Status windows are technology-specific. For example, a DS-3 interface supports two technologies: Generic and DS-3. Therefore, if you wish to view the status of a DS-3 interface, you must view two windows: the Generic Interface Status window and the DS-3 Interface Status window.

This process is also applicable to ATM, Ethernet, POS or SRP interfaces. The following table outlines which technology-specific status windows apply to each interface type.

Table 9-1 Interface Types and Status Windows

	Interface Type	Technology-Specific Status Window
	DS-3	Generic and DS-3
	ATM	Generic, ATM and SONET
	Ethernet	Generic
	POS	Generic and SONET
		Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01			9-1