3While the Status indicator is blinking, press L repeatedly to select an orientation of the virtual left surround speaker, or press R repeatedly to select an orientation of the virtual right surround speaker.
Each time you press the button, the orientation changes as follows.
20°
(Five status indicators from the right or left light up)
30°
(Four status indicators from the right or left light up)
40°
(Three status indicators from the right or left light up)
50°
(Two status indicators from the right or left light up)
60°
(Rightmost or leftmost status indicator lights up)
y
Adjust the angle so that the first reflection point (A) is located posterior to the listening position and surround speaker channel audio reaches the listening position after reflections as shown below. For information on the recommended listening environment and virtual surround speaker settings, refer to “Recommended Virtual Surround Speaker Settings” (page 20).
CONFIGURATIONS
Satellite speaker (L) | Satellite speaker (R) |
Press L to | Press R to |
adjust | adjust |
A | A |
B | B |
Satellite speaker (L) | Satellite speaker (R) |
Press L to | Press R to |
adjust | adjust |
A | A |
B | B |
4To confirm the adjustment, press TEST.
y
To reset the orientations to the factory settings, press INPUT on the front panel while a test tone is output. (This procedure also resets the speaker balance.)
CONFIGURATIONS
17