CONFIGURATIONS
■Adjusting the speaker balance
during playback
If you feel the speaker balance is not proper during playback, follow the procedure below.
| STANDBY/ON | STANDBY/ON |
| ||
CENTER +/– |
|
|
| DVD |
|
|
|
| ANGLE |
| |
|
|
|
|
| |
SW +/– | 1 | 2 | 3 | 4 | SURR +/– |
SW | CENTER | SURR | ZOOM | ||
| 5 | 6 | 7 | 8 |
|
| REPEAT | AUDIO | SUBTITLE |
| |
| 9 | 0 |
|
|
|
|
|
|
| SHIFT |
|
| TV | TV INPUT |
| SHIFT | |
|
|
|
| DUAL MONO |
|
| TV CH | qVS |
|
|
ON SCREEN | SETUP |
ENTER
MENURETURN
During playback, carry out the following operation for your purpose.
To adjust the volume level of the center speaker channel:
While holding down SHIFT, press CENTER
To adjust the volume level of the surround speaker channels:
While holding down SHIFT, press SURR
To adjust the volume level of the subwoofer channel:
While holding down SHIFT, press SW
y
•We recommend that you first adjust the speaker balance with test tones (page 15).
•You can check the volume level in detail with the Status indicator (page 18).
•The adjustable range for the volume level of each speaker channel is as follows.
–Center:
–Surround:
–Subwoofer:
•You cannot adjust the left and right surround speakers individually with this procedure. To adjust them individually, carry out the “Adjusting the speaker balance with test tones” procedure (page 15).
Adjusting the Orientation of the Virtual Surround Speakers
This unit employs the Yamaha Air Surround system that enables the surround sound field using six speaker units built in two satellite speakers. To create better acoustic field, please adjust the orientation of the virtual surround speakers suited for your listening environment. You can select from five presets for each satellite speaker (L and R).
Note
To create better acoustic field, you may need to change the arrangement of the satellite speakers or furniture. For example, the Air Surround system does not work well (or does not work at all) in the following situations.
–The satellite speakers are placed inside the rack.
–The satellite speakers are not placed perpendicular to the side walls.
–There is an obstacle at the front (or diagonally in front) of satellite speakers.
–A piece of furniture is placed at the reflection points (A, B).
–There are no reflection faces (walls or windows).
y
•You cannot adjust the orientation of the virtual surround speakers while the DVS function is activated. To adjust it, press qVS to disable the DVS function.
•When headphones are connected to the SILENT CINEMA jack on the unit, the adjustment is not available.
ON SCREEN | SETUP |
ENTER
MENURETURN
TV VOL | VOLUME |
MUTE
| NIGHT |
|
| |
TEST |
| L | R | L/R |
TEST |
| 1 | 2 | |
|
| INPUT |
|
|
MODE |
| 3 | 4 |
|
MOVIE | MUSIC | SPORTS | GAME |
|
1Press TEST.
Each speaker outputs the test tone for about 2.5 seconds in order.
2Press L once to check the current orientation of the virtual left surround speaker, or press R once to check the current orientation of the virtual right surround speaker.
The Status indicator blinks to show the current orientation for about 2.5 seconds. By the factory setting, “40°” is selected for each speaker.
16