PREPARATION

Placing the Satellite Speakers

You can place the satellite speakers on a rack, or attach them to a wall. Please select an installation method that suits your room layout.

y

You can attach the satellite speaker to a commercially available speaker bracket or speaker stand using the screw holes on the bottom of the speakers. In this case, be sure to use 6M (diameter of 6 mm) screws.

To place on a rack

Attach the non-skid pads (small) to the bottom of each speaker, and then place them on level hard

Non-skid pad

surfaces.

(small)

 

y

Using non-skid pads prevents the speakers from sliding when they vibrate, and ensures quality sound production.

PREPARATION

To attach to a wall

198 mm

Diameter of 3.5 to 4 mm

(7-25/32”)

(1/8” to 5/32”)

 

 

 

 

20 mm (25/32”)

4 mm

 

or more

(5/32”)

198 mm (7-25/32”)

You can attach the speakers to a wall using commercially available screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”), Length: 24 mm (15/16”) or more). One speaker requires two screws.

1Install two screws in the wall where you want to place the speaker.

2Hang the speaker on the screws using the holes in the back of the speaker.

Notes

One speaker weighs about 1.4 kg (3 lbs 3 oz). To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall.

Make sure you use specified screws to attach a speaker to a wall. Using clamps other than specified screws, such as short screws, nails, or two-sided tape, may cause the speaker to fall.

When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall.

After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused by improper installations.

Placing the subwoofer

Attach the non-skid pads (large) to the bottom of the subwoofer, and then place the subwoofer on a level hard floor.

y

Using non-skid pads prevents the subwoofer from sliding when it vibrates, and ensures quality sound production.

Non-skid pad (large)

7

Page 9
Image 9
Yamaha AVX-S30 owner manual Placing the Satellite Speakers, Placing the subwoofer, To place on a rack, To attach to a wall

AVX-S30 specifications

The Yamaha AVX-S30 is a versatile and powerful AV receiver that brings the ultimate home theater experience to consumers. Known for its robust features and user-friendly interface, the AVX-S30 is designed to cater to both audiophiles and casual listeners, making it an excellent choice for anyone looking to elevate their audio-visual setup.

One of the key features of the Yamaha AVX-S30 is its support for high-definition audio formats, including Dolby Atmos and DTS:X. These advanced audio technologies create a three-dimensional sound experience, allowing users to feel immersed in their favorite movies, music, or games. The receiver's ability to decode these formats ensures that every sound detail is captured and reproduced accurately.

The AVX-S30 boasts a powerful amplification system, delivering a total power output of 100 watts per channel. This performance ensures dynamic sound reproduction, whether it's a quiet dialogue in a film or the explosion of sound during an action sequence. The high-current power supply design enhances efficiency while maintaining superb sound quality across all channels.

Connectivity is another strong point of the Yamaha AVX-S30, featuring multiple HDMI inputs, including support for 4K Ultra HD passthrough and HDR technology. This allows users to connect a variety of devices such as gaming consoles, Blu-ray players, and streaming devices without compromising on video quality. Additionally, the receiver has built-in Bluetooth and Wi-Fi, making it easy for users to stream music from their smartphones, tablets, or other devices.

Yamaha's innovative YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the AVX-S30, allowing for automatic room calibration. This feature measures the acoustic characteristics of your room using a provided microphone and adjusts the receiver's audio settings for optimal sound performance tailored to your specific environment.

The AVX-S30 also comes with a user-friendly interface, complete with an on-screen setup guide that simplifies the installation process. With easy access to various settings and features, users can quickly adjust their audio preferences for an enhanced listening experience.

In conclusion, the Yamaha AVX-S30 is a well-rounded AV receiver that offers a plethora of features, from advanced audio decoding capabilities and powerful amplification to extensive connectivity options and innovative technology. Whether you are enjoying a movie night or hosting a party, the AVX-S30 is designed to deliver exceptional audio-visual performance, making it a strong contender in the competitive AV receiver market.