Chapter 2 — Installation
4.For the
5.As for the ISDN Accelerator Pack 1.1, you will see a section labelled “Set Additional Devices” at the bottom of the “General” tab. Click on the “Settings” button to display the “Set Additional Devices” dialog.
6.On the “Set Additional Devices” dialog, click on the “Use Additional Devices” radio button.
7.Use this dialog to specify the devices to be bundled together to form the “multilink” connection.
8.Use the “Add”, “Remove”, and “Edit” buttons to change the list of additional devices.
9.You may enter a different phone number for each device, and both phone numbers will be stored. If you subsequently change the phone number for the connection icon, the phone numbers associated with additional devices on this page will not change.
After your additional devices are configured, you are ready to dial your multilink connection. Once the connections are established, you can view status information about the link by double clicking on the “communicating computers” icon displayed in the taskbar.
The status information includes the number of bytes sent and received, the network protocols negotiated for use on the connection, and a list box showing each of the additional devices. As you highlight a device in the list box, a “Suspend” or “Resume” button is displayed.
If a Suspend button is displayed, then the device is now in use and “bundled” into the multilink connection. Clicking on the “Suspend” button disconnects that line and removes the line from the bundled connections.
25
