Acer LCD-S243HL service manual 1S/N Label, Carton label

Acer Acer –LCD-S243HL

7.1.3Non operation Thermal Shock Test

Item	Description
Temperature	-200C to 600C
Reset cycles times	25ºC>60ºC (10hrs)>25ºC (2hrs)>-20ºC(10hrs)>25ºC
	3cycles ,every transition time 0.5 hr,
Total cycles	3 cycles

7.1.4Package Drop

Drop height (Select drop height according to the gross weight refer to the table at below)

	Gross Weight(kg)				1.0<W≦9.0
	Drop Height(cm)				76
					√
Drop sequence and orientation
Drop		Drop onto		Type Drop	Figure
Step 1		Corner(2-3-5)of package		Corner
Step 2		Edge(3-5)	of package	Edge
Step 3		Edge(2-3)	of package	Edge
Step 4		Edge(2-5)	of package	Edge
Step 5		Face(bottom-3)of package		Flat
Step 6		Face(left-4)	of package	Flat
Step 7		Face(front-5) of package		Flat
Step 8		Face(right-2) of package		Flat
Step 9		Face(rear-6)	of package	Flat
Step 10		Face(Top-1)	of package	Flat

Mechanical and electrical damage should not exist after vibration test, and shall be submitted for approval customer before mass production.

8. Marking and Identification

8.1S/N Label

The approval marking is required by the countries of sales destination.

8.2 Carton label

The approval marking is required by the countries of sales destination.