Acer P7270i, P7280i Series manual English, Icon, Function, Description

English

6

#	Icon	Function	Description
			• Press "MENU" to launch the Onscreen display (OSD) menu,
14		MENU	back to the previous step for the OSD menu operation or
			exit the OSD menu.
			• Confirm your selection of items.
		Four directional	Use up, down, left, right buttons to select items or make
15		select keys	adjustments to your selection.
		KEYSTONE	Adjusts the image to compensate for distortion caused by
			tilting the projector.
16		LOCATION	Choose the menu location on the display screen.
			For computer mode only. Use this button to select the next or
17		PAGE	previous page. This function is only available when connected
			to a computer via a USB cable.
18		Empowering	Unique Acer functions: eOpening, eView, eTimer
		key	Management.
19		COLOR	Press "COLOR" to adjust the color temperature of image.
20		CONTRAST	Use the "CONTRAST" option to control the difference
			between the lightest and darkest parts of the picture.
21		VIDEO	To change source to COMPOSITE VIDEO.
22		S-VIDEO	To change source to S-Video.
			Press "PIP" to see two screens at the same time. The main
23		PIP	screen projection signal uses VGA input by default while the
			smaller PIP display uses a secondary video source.
24(*)		WIRELESS	Press "WIRELESS" to display the image which is wirelessly
			transmitted from the PC to the projector via the "Acer
			eProjection Management" utility. (for wireless model)
25		BRIGHTNESS	Press "BRIGHTNESS" to adjust the brightness of the image.
26		RGB	Press "RGB" for true-color optimization.
			Press "COMPONENT" to change source to Component video.
27		COMPONENT	This connection supports YPbPr (480p/576p/720p/1080i) and
			YCbCr (480i/576i).
28		VGA	Press "VGA" to change source to the VGA connector. This
			connector supports analog RGB, YPbPr (480p/576p/720p/
			1080i), YCbCr (480i/576i) and RGBsync.
			Press "DVI" to change source to DVI. This connection supports
29		DVI	digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr
			(480i/576i) and HDCP signals.
30		HDMI™	To change source to HDMI™.
31		KeyPad 0~9	Press "0~9" to input a password in the "Security settings".

Note: "*" Only for P7270i/P7280i series. "#" Japan area is not supported.