Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for ad- justing the image height.
To raise the image:
1.Press the elevator button .
2.Raise the image to the desired height angle , then re- lease the button to lock the elevator foot into position.
3.Use screw in feet to
To lower the image:
1.Press the elevator button.
2.Lower the image, then release the button to lock the el- evator foot into position.
3.Use screw in feet to
1
Elevator Button
2 | 3 |
Elevator Foot | Tilt Adjusting Foot |
