Appendices
=>Light On 
=>Light Off
Problem: The image is outstretched when displaying 16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default set- ting.
If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
Select “Image” from the OSD and adjust the projection direction. See page 22.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”.
See page 37.
Problem: LED lighting message
Message | Power LED | Temp LED Lamp LED | |
Red | |||
| Blue | ||
Standby State | Slow Flashing |
| |
(Input power cord) |
| ||
Lamp lighting |
|
| |
Power on |
|
| |
Power off (Cooling) | Quick Flashing |
| |
Error (Lamp fail) |
|
| |
Error (Thermal fail) |
|
| |
Error (Fan lock fail) |
| Flashing | |
Error (Over Temp.) |
|
| |
Error (Lamp Breakdown) |
|
|
English ... 36
