User Controls
“H. Position”, “V. Position”, “Frequency” and “ Tracking” func- tions are not supported under DVI and Video mode.
“Sharpness” func- tions is not supported under DVI and Com- puter mode.
Image
(Computer / Video
Mode)
turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection.
H. Position (Horizontal Position)
Press the 
to move the image left.
Press the 
to move the image right.
V. Position (Vertical Position)
Press the 
to move the image down.
Press the 
to move the image up.
Frequency
“Frequency” changes the display data frequency to match the fre- quency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it.
Sharpness
Adjusts the sharpness of the image.
Press the 
to decrease the sharpness. Press the 
to increase the sharpness.
