3... English
Usage Notice

Precautions

Follow all warnings, precautions and maintenance as recommended in this
user’s guide to maximize the life of your unit.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- Toreducetheriskofreorelectricshock,donot
expose this product to rain or moistu re.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- Whenchangingt helamp,pleaseallowunittocool
down,andfollowallchangingin structions.
Warning- This product will detect the li fe of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Hour Reset” function fr om the On
Screen Display “Management” menu after re placing
the lamp module (refer to page 28)
Warning- Whenswitchingt heprojectoroff,pleaseensurethe
projector completes its cooling cycle before
disconnecting power.
Warning- Turnontheprojectorrstandthent hesignal
sources.
Warning- Do not use lens cap when projector is in operation.
Warning- Whenthelampreachest heendofitslife,itwillburn
out and may make a loud popping sound. If this
happens,theprojectorwillnottu rnbackonuntilthe
lampmodulehasbeenreplaced.Toreplacethelamp,
follow the procedures listed under “Replacing the
Lamp”.