49 ... English
Appendices
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message “Lamp is approaching the end of its useful
life in full power operation. Replacement Suggested!” When
youseethismessage,changingthelampassoonaspossible.
Makesuretheprojectorhasbeencooleddownforatleast30
minutes before changing the lamp.
Warning: Lamp
compartment is hot!
Allow it to cool down
before changing lamp!
Warning: To
reduce the risk of
personalinjury,donot
drop the lamp module
or touch the lamp bulb.
The bulb may shatter
and cause injury if it is
dropped.
13
4
2
Lamp Changing Procedure:
1.TurnthepowerofftheprojectorbypressingthePowerbutton.
2.Allowtheprojectortocooldownatleast30minutes.
3. Disconnect the power cord.
4.Removethecover.
5. Push up and remove the cover.
6.Removethe3screwsfromthelampmodule.
7.Pulloutthelampmodule.
To replace the lamp module, reverse the previous steps.