44 Chapter 3
Removing the Hard Disk Dr ive Module
1. Remove the screw of the hard disk module.
2. Slide the hard disk module out from its bay.
NOTE: 1After loosening the hard disk drive screw, you must completely re mo ve it so you can then slide out the
hard disk drive. It may be a little difficult to completely remove the screw.

Disassembling the Hard Disk Drive Module

1. Gently, detach the connector from the hard disk module.
2. Remove the two screws on both sides of the hard disk module.
3. Remove the hard disk plate from the hard disk module.
4. Slide the hard disk out from the hard disk drive bezel.
5. This completes the disassembly procedure of the hard disk drive .
1New added description. Pl ease pay attention to t his note.
340SG.book Page 44 T hursday, October 28, 1999 10:51 AM