Acesonic KOD-1100 USB To PC Mode ON, OFF, System Upgrade Start, Add Song From USB/SD Start

3.USB To PC Mode: ON, OFF

3-1. Connect the KOD-1100 to a PC via a provided USB cable and turn on KOD-1100.

3-2. Press [SETUP] on the remote controller

and input default password “88888888” then press [ENTER] to confirm. Press [ENTER] again to exit karaoke mode.

3-3. Press [3] on the remote controller or use buttons to select “SETUP” and then press [ENTER].

3-4. Press [3] or use buttons to select option 3 and then press [ENTER] to set it as "ON Mode".

3-5. Wait few seconds, if your PC detects the

KOD-1100, then a USB icon will be displayed on your tool taskbar.

4.System Upgrade: Start

4-1. Only needed if there is a new firmware update.

Put the new updated firmware on an USB devices or an SD card and select the option to do a firmware updating.

5.Add Song From USB/SD: Start

5-1. This function works only when you create a

USB/SD song updated file via the PC program.

6.Screen: Single, Dual, Single+Time Limit, Dual+Time Limit, Single Coin and Dual Coin.

6-1. If Single Coin or Dual Coin is selected, users can only play songs in karaoke mode when a coin

machine is connected to the KOD-1100. * The Coin

Machine is sold separately.

6-2. If Single+Time Limit or Double+Time Limit is selected, users can only add songs to the playlist in the period of time. The time can be set by the following steps.

1.EXIT Karaoke Mode.

2.Press [3] to acess SETUP sub-menu.

3.Press [6] and press to select Single+Time Limit or Double+Time Limit.

4.Press [RETURN] and press [2] to select "Karaoke" mode.

5.Press [SETUP] again and input the default password "88888888" then press [ENTER]. The display will show "Press [ENTER] to exit and Press [MENU] key to set time".

6.Press [MENU] and press to set up time then press [ENTER] to exit and save.

7.Touch Screen Setup:

Press [ENTER] to start calibrating the touch screen.

7-1. After pressing [ENTER], the "+" sign will show up on the top left hand side first. Use your finger to touch this "+" sign to start calibrating.

15