Acoustic Research XMC90 owner manual Using the XM Docking Station

MODEL XMC90 OWNER’S MANUAL

4.0 XM Docking Station

This station provides docking accommodations for an external mini XM receiver. (Refer to previous figure.) Note: The XM mini receiver and XM antenna are not included with the XMC90.( P/N:CNP2000)

4.1Using the XM Docking Station

1.Swing up the protective cover door to access the iPod/XM receiver system connector bay.

2.Install the mini receiver carefully onto the receiver connector and press down lightly until the receiver bottoms into the recess.

Note: The receiver can be inserted in one way only; the XM logo should face toward the front of the unit.

3.Press the MODE button until XM is highlighted; then press the Scroll Wheel select button.

If the XM antenna is not connected, or an XM antenna fault occurs, the following message screens may appear:

If a receiver fault occurs or if the receiver is improperly installed, the following message screen appears:

Use the number (1-10) buttons to directly select a channel number, or press the select button twice; a beep occurs and the scroll wheel can be used to browse the channel list

Note: After 20 seconds, channel scroll will time out and the scroll wheel will return to Volume Control.

Select the Category using the CAT+/- buttons; select channel within the category using the CH+/- buttons or scroll wheel

VERSION V 0.0 Page 11 of 20