Actiontec electronic GT704 Performing a Basic Setup

Performing a

This chapter is a guide through a basic configuration setup of the Gateway for

users who did NOT use the Actiontec Installation Buddy® to setup the Gateway.

The basic setup includes instructions on how to connect the Gateway to the ISP

and changing the adnim user name and password.

To complete a basic setup, the user will need information provided by the ISP and

access the Gateway’s Web Configurator. This information from the ISP is some-

times contained in a welcome letter or ISP worksheet. If this document is not avail-

able, contact the ISP immediately and request one.

☞ Note: If you already set up the Gateway using the Installation

Buddy (as described in Chapter 2, “Setting Up the Gateway”), the

settings described in this section have already been configured.

Please continue to chapter 4, “Using Advanced Setup,” to configure

the advanced settings of the Gateway.

1. Open a Web browser. In the “Address” text box, type

http://192.168.0.1

then press Enter on the keyboard.

2. The Web Configurator’s “Main Menu” screen appears. Select Setup/

Configuration.