Actiontec electronic GT704 NAT (Network Address Translation), Static Routing

Actiontec USB/Ethernet DSL Gateway User Manual

Chapter 4 Using Advanced Setup

NAT (Network Address Translation)

Selecting NAT in the “Configuring the Advanced Settings” screen generates the

“NAT” screen. The Gateway’s basic firewall security is based on NAT. Disabling NAT

allows the computers connected to the Gateway to be accessed by outside parties.

Do not turn NAT off unless instructed to do so by the ISP.

Selecting Static Routing in the “Configuring the Advanced Settings” screen gener-

ates the “Static Routing” screen. Enter the addresses in their respective text boxes,

then click Add. The address will appear in the “Static Routing Table.” To remove

an address, highlight it by clicking on it in the Static Routing Table, then click

Remove.