Actiontec electronic GT704WG-QW04 user manual Click Save and Restart at the bottom of the screen

Chapter 3 Setting Up Static IP

9.Once the Gateway restarts, return to the Setup/Configuration screen and select Change Admin Password from the menu on the left side.

10.The “Change Admin Username/Password” screen appears. Enter a new user name (optional) in the “New Username” text box, then a password in the “New Password” text box. Re-enter the password in the “Re-enter New Password” text box. Make sure to write the user name and password down and keep them in a secure location. They will be needed to access to the Gateway’s Web Configurations screens in the future.

11.Click “Save and Restart” at the bottom of the screen.

12.The “Save and Restart” page appears. Click “Save and Restart” to save the set- tings changed in the Change Admin Username/Password screen.

The Gateway has been configured to support a single static IP address. Once the Power light stops blinking, the Gateway is ready for use.

17