
Troubleshooting
| Problem | Possible Solution | ||||
|
|
|
|
| If the wireless signal indicator shows no bars: | |
|
|
|
|
| • Relocate the display unit and/or the outdoor sensor. The | |
|
|
|
|
| units must be within 330 ft (100 m) of each other. | |
No outdoor sensor | • Make sure both units are placed at least 3 feet | |||||
(.9 m) away from electronics that may interfere with | ||||||
| reception | the wireless communication (such as TVs, microwaves, | ||||
|
|
|
| no bars | computers, etc). | |
|
|
|
| |||
|
|
|
| • Use standard alkaline batteries (or lithium batteries in | ||
|
| |||||
| ||||||
|
|
|
|
| ||
|
|
|
|
| sensor when temperature is below | |
|
|
|
|
| use heavy duty or rechargeable batteries. NOTE: It | |
|
|
|
|
| may take up to 20 minutes for display unit and sensor to | |
|
|
|
|
| synchronize after batteries are replaced. | |
|
|
|
|
|
| |
|
|
|
|
| Flashing of the outdoor temperature is generally an | |
|
|
|
|
| indication of wireless interference. | |
|
|
|
|
| 1. Bring both the sensor and display unit indoors and | |
|
| Outdoor | remove batteries from each. | |||
temperature | 2. Make sure the | |||||
is flashing or | 3. Reinstall batteries in the outdoor sensor. | |||||
showing dashes | 4. Reinstall batteries in the display unit. | |||||
|
|
|
|
| 5. Let the units sit within a couple feet of each other | |
|
|
|
|
| for about 20 minutes to gain a strong connection. | |
|
|
|
|
| Sometimes changing to a different channel can help. | |
|
|
|
|
|
| |
|
|
|
|
| • Weather Forecast icon predicts conditions for the next 12 | |
|
|
|
|
| to 24 hours, not current conditions. | |
|
|
|
|
| • Has Learning Mode icon disappeared from the display | |
|
|
|
|
| unit? Learning Mode must complete before forecast and | |
Inaccurate forecast | pressure will be accurate. | |||||
• Allow unit to run continuously for 33 days. Battery | ||||||
|
|
|
|
| ||
|
|
|
|
| removal or resetting the display unit will restart Learning | |
|
|
|
|
| Mode. After 14 days, forecast should be fairly accurate, | |
|
|
|
|
| however Learning Mode calibrates for a total of 33 | |
|
|
|
|
| days. | |
|
|
|
|
|
| |
Inaccurate | • Make sure both the display unit and sensor are placed | |||||
out of direct sunlight and away from any heat sources or | ||||||
temperature | vents (see page 8). | |||||
or humidity | • Make sure both units are positioned away from moisture | |||||
|
|
|
|
| sources (see page 8). | |
|
|
|
|
|
|
10