Manuals / Mega Catch / Household Appliance / Stove

Mega Catch Mini Troubleshooting, Stove will not start, Stove will not operate when hot

Models: Mini

1 31
Download 31 pages 17.59 Kb
Page 22
Image 22

Troubleshooting

DO NOT:

●Service the stove with wet hands. The stove is an electrical appliance, which may pose a shock hazard if handled improperly. Only qualified technicians should deal with possible internal electrical failures.

●Do not remove from the firebox any screws without penetrating oil lubrication.

WHAT TO DO IF:

1.The stove will not start.

2.The stove will not operate when hot.

3.The exhaust blower will not function normally.

4.Light # 2 on Heat output bar flashing.

5.Auger light flashes but auger motor does not turn at all

6.The 200 °F (93 °C) high limit temperature sensor has tripped.

7.The convection blower will not function normally.

8.Igniter- the pellets will not light.

9.Control settings (Heat Level) has no effect on the fire.

10.The stove keeps going out.

*NOTE: All troubleshooting procedures should be carried out by qualified technicians or installers.

1. The stove will not start.

üMake sure the stove is plugged in and the wall outlet is supplying power..

üIf the Control Board has been placed in the ON /OFF thermostat mode, then turn the thermostat up to call for heat.

üCheck the Heat Level Indicator. - If the # 2 light is flashing (see the # 2 light is flashing) üCheck the fuses on the circuit board (see “Troubleshooting - Fuses”).

üIf the unit still does not start, contact your local service dealer for service.

2. The stove will not operate when hot.

üCheck the Heat Level Indicator if a fire is not detected, or if the fire has gone out the #3 light will flash because the Exhaust Temperature Sensor’s contacts have opened.

üCheck the hopper for fuel.

üIncorrect air damper setting. - Excessive air may consume the fire too quickly before the next drop of fuel, leaving completely unburned fuel in the burn pot liner. - Insufficient air will cause build up, further restricting the air flow through the Burn Pot Liner. This in turn will cause the fuel to burn cold and very slowly. Fuel may build up and smother the fire. In this case clean the burn pot. (NOTE: unit may require a change to the vent system or installation of fresh air to correct Air to Fuel ratio problems).

üCombustion Blower failure. - The Combustion Blower is not turning fast enough to generate the proper vacuum in the fire box. Visual Check – is the blower motor turning.

üCheck the Exhaust Blower voltage across the blower wires (>=114V on #5 setting and >= 82V on #1 setting). – Replace the Circuit Board if the Voltage reading is less than 82 V. with a line voltage >114 V AC.

üCheck Vacuum levels in the exhaust channel by bypassing the Vacuum Switch, then remove the Vacuum hose from Vacuum Switch. Check exhaust vacuum readings by placing the open end of the Vacuum Hose on a Magnahelic Gauge (readings must be above .10” W.C. on low fire).

If the motor fails to reach a 0.10” W.C. readings, then replace the Combustion Blower.

22

Page 21 Page 23
Page 22
Image 22
Mega Catch Mini technical manual Troubleshooting, Stove will not start, Stove will not operate when hot
Page 21 Page 23

Mini specifications

The Mega Catch Mini is a state-of-the-art mosquito trap designed for users who demand effectiveness and ease of use in pest control. Compact in size yet powerful in performance, this innovative device is perfect for both indoor and outdoor settings, making it a versatile solution for homeowners and outdoor enthusiasts alike.

One of the main features of the Mega Catch Mini is its advanced CO2 technology. This trap imitates human breath by releasing carbon dioxide, which attracts mosquitoes and other flying insects. By mimicking the natural allure of humans, the Mega Catch Mini effectively increases its catch rate, ensuring fewer pesky insects buzzing around your space.

Another notable characteristic is its silent operation. Unlike traditional bug zappers that create an audible zap sound, the Mega Catch Mini operates quietly, ensuring that your peaceful evenings are undisturbed. This makes it an ideal choice for patio gatherings, backyard barbeques, or simply enjoying a quiet night at home.

The Mega Catch Mini is also equipped with a powerful fan that draws insects into a contained trap, preventing their escape. This efficient trapping mechanism eliminates the need for toxic chemicals or harmful pesticides, making it a safer option for households with children and pets.

Easy to set up and use, the Mega Catch Mini features a simple plug-and-play design. Users can easily place it in any location for optimal performance. Its lightweight design makes it easy to move from one area to another, ensuring that you can adapt to varying outdoor conditions.

In terms of maintenance, the Mega Catch Mini is user-friendly. It has a removable catching tray that can be easily cleaned and emptied. This simplicity in maintenance ensures that users can operate the unit consistently without the hassle of complicated procedures.

Power-efficient design is another hallmark of the Mega Catch Mini. It consumes minimal energy compared to traditional insect traps, reducing your electricity bills while keeping your space free from bugs.

Overall, the Mega Catch Mini stands out as an effective, user-friendly, and environmentally-friendly solution for controlling mosquito populations. Its innovative technology, combined with practical features, makes it a top choice for anyone looking to enjoy their outdoor spaces without the nuisance of insects.