Adams AQT SERIES manual Before Weighing, Weighing Procedures

6.0 WEIGHING

6.1BEFORE WEIGHING

Be aware of the Automatic power-off function. If the Automatic power-off function is active it will turn the balance off after 2 minutes of inactivity.

6.2WEIGHING PROCEDURES

•Press [On/Off] to turn on the balance.

When power is turned on, all display segments appear on LCD for a few seconds and finally on the display "0.00" will appear along with the last selected units.

•Select the weighing unit with [Unit].

Press [Unit] to select a weighing unit, eg. "g" / "ct" / "oz" or "dwt" . Once the unit has been selected, the weight will be displayed in the selected unit and a symbol for the weight will be shown.

•Start weighing

•If you do not use a container for weighing

Verify the reading is "0.00". If not, press [Tare] to display "0.00". Place the objects on the weighing pan to weigh.

When the reading becomes stable, the stable indicator is displayed.

•If you use a container for weighing

Place an empty container on the pan.

Wait for the stability indicator to be displayed and press [Tare]. Place the objects to be weighed in the container.

When the reading becomes stable, the stable indicator is displayed. Only the net weight is displayed.