SETTING OF USER PARAMETERS
PARAMETER SUB-
PARAMETER DESCRIPTION DEFAULT
VALUE
SEt Lo Sets a value for the Low Limit used for
checkweighing. 000.000 F0 H-L
SEt HI Sets a value for the High Limit for
checkweighing. 000.000
to CLr Clears the Accumulation Total in the
memory without printing the results.
to P-C Prints the Accumulation Total in the
memory and then clears the memory.
F1 toL
to Prt Prints the Accumulation Total in the
memory but does not clear the memory.
F2 unt Ut oFF
Ut on Enables or disables the weighing units.
Use the [Zero/Enter] key to select the
weighing unit to enable/disable. Use the
[Tare/Ï] to change the unit to ON or OFF.
SEt dA Sets the date, Display will show the last
date set or 00.01.01. Enter the new date,
format is yy.mm.dd
F3 tI
SEt tI Sets the time, Display will show the
current time Enter the new time, format is
hh.mm.ss
CLoCK Sets clock to OFF or ON as screen saver.
CLK oF
CLK on
CLK oF
bL Sets the backlight to be on, automatic or
off
EL on
EL Au
EL oFF
EL Au
F4 oFF
bEEP Sets the beeper to-
1 (off all the time),
2 (ON when the weight is OK, i.e., in
between LO and HI limits) or
3 (ON only when the weight is outside the
limits during the check-weighing function).
This setting does not affect the beeper
during normal weighing.
bP 2
@Adam Equipment Company 2006
17