10 | Open | Close (JP4/IRQ10 also set close) |
11 * | Close | Open (JP4/IRQ11 also set close) |
12 | Open | Open (JP4/IRQ12 also set close) |
(* means default setting)
Jumper Block JP4 also needs to set to the same IRQ channel.
JP5 Set
This setting is valid only if DMA is enabled on JP6 (DT - data transfer mode). (Jumper Block JP3 must also be the same DMA channel)
DMA | DC1 | DC2 |
|
0 * | Close | Close | (JP3/DMA0 also set close) |
5 | Open | Close | (JP3/DMA5 also set close) |
6 | Close | Open | (JP3/DMA6 also set close) |
7 | Open | Open | (JP3/DMA7 also set close) |
(* means default setting)
JP5 Enable/Disable
1 4
