ADCP-80-524 • Issue 1 • November 2001

1.17 Cooling

Vent openings are provided in the top and bottom of the fuse panel. The vent openings allow convection cooling of all components without the use of fans or blowers.

1.18 Protective Cover

A smoked plastic protective cover is mounted over the input power connectors, the output power connectors, the chassis ground terminals, and the external alarm contact connections. To access the connectors and terminals, the cover may be easily removed by loosening (but not removing) four screws.

1.19 Dimensions

The dimensions of the traditional power fuse panel are shown in Figure 10. The dimensions of the uninterrupted power fuse panel are shown in Figure 11.

10.01 IN.

(25.42 CM)

11.35 IN.

(28.82 CM)

17.13IN.

(43.51 CM)

19.0IN.

(48.26 CM)

18.31IN.

(46.51 CM)

1.13 IN. 1.75 IN.

(2.86 CM) (4.45 CM)

16158-B

Figure 10. Dimensions of Type 70 Traditional Power Fuse Panel

(with Mounting Brackets Attached for 19-Inch [48.26 cm] Rack Mounting)

Page 15

© 2001, ADC Telecommunications, Inc.