Installation

LTPH-UM-1088-02, Issue 2

 

 

MOUNTING THE CHASSIS

Three 8-32 x 5/16 screws

Two 6-32 x 1/4 screws

CO rack

ESD input bracket

Mounting brackets

Two 12-24 x 1/2 screws

Two 12-24 x 1/2 screws

Three 8-32 x 5/16 screws

Figure 2. ThinMux Chassis in a CO Rack

1Install a mounting bracket on each side of the ThinMux chassis using the three screws provided for each bracket (8-32 x 5/16 screws) as shown in Figure 2. (Mounting brackets and screws are contained in the installation kit.)

Two sets of mounting brackets are supplied to fit 19-inch or 23-inch racks with standard EIA-hole spacing (1/2 inch).

Optional brackets with WECO-hole spacing (1 inch) are available (ACE-MK1).

2Install ESD input bracket on front left side of the chassis.

3Align the chassis mounting bracket holes with the rack’s vertical mounting holes. Mount the chassis in the rack. Install two

12-24 x 1/2 screws in each bracket and secure the chassis to the rack.

6

January 3, 2002

ThinMux Chassis