ADC Broadband System 204

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

		DLP-556
		Page 2 of 3
6. Move to the Mon Type Alarms toggle fields. The following selections are possible:
•	Critical	Allows notification of all Critical, Major, Minor, and Event alarms as they
	occur.
•	Major	Allows notification of all Major, Minor, and Event alarms as they occur.
•	Minor	Allows notification of all Minor and Event alarms as they occur.
•	Event	Allows notification of all events as they occur.
Reference:		TAP-101Alarm Troubleshooting

7.Assign the selections by pressing Enter or Return.

8.Repeat Steps 3 through 7 for each applicable DS1 signal in the chassis.

Note: Pressing CONTROL-C and confirming with the Y key removes all threshold values and alarm level information from the database for the group and slot selected.

Stop! You have completed this procedure.


			DS1 PERFORMANCE MONITORING CONFIGURATION
		Group: 1	Circuit: 1		Circuit ID:
	15 MINUTE		DAILY					15 MINUTE	DAILY
MON	==============		================			MON	==============		================
TYPE	THRSH ALM LVL		THRSH	ALM LVL		TYPE	THRSH ALM LVL		THRSH	ALM LVL
====	===== ========		=======	========		========	===== ========		=======	========
FCP	5	EVENT	480	EVENT		AISSP	10	EVENT	100	EVENT
CVL	13340	EVENT	133400	EVENT		FCP-FE	5	EVENT	480	EVENT
ESL	65	EVENT	648	EVENT		ESL-FE	65	EVENT	648	EVENT
SESL	10	EVENT	100	EVENT		CVP-FE	13340 EVENT		133400	EVENT
LOSS	10	EVENT	100	EVENT		ESP-FE	65	EVENT	648	EVENT
CVP	13340	EVENT	133400	EVENT		SESP-FE	10	EVENT	100	EVENT
ESP	65	EVENT	648	EVENT		UASP-FE	10	EVENT	100	EVENT
SESP	10	EVENT	100	EVENT		CSSP-FE	10	EVENT	100	EVENT
UASP	10	EVENT	100	EVENT		SEFSP-FE	10	EVENT	100	EVENT
SASP	10	EVENT	100	EVENT
		CVs PER SESL: 1544			CVs PER SESP: 330		CVs PER SESP-FE: 330

Press CONTROL-A For Assistance, CONTROL-C To Clear All PM Counts

6146-B

*Indicates valid range of values for selected field. See Table 556-1.

Figure 556-1. DS1 PM Configuration Screen

2-181