Installing and Configuring the Line Unit
Standard Mode ConfigurationThis section continues from Step 4 in the previous section to set a standard HDSL transmission rate.
1If the Operating Mode is set to STANDARD, skip to Step 3. Otherwise, press Enter.
2Press Next until STANDARD displays, then press Enter. The LCD displays OPERATING MODE.
3Press Next until HDSL RATE displays, then press Enter.
4Press Next until the desired HDSL transmission rate displays, then press Enter.
To continue setting up the system, proceed to the “Set the HDSL Transceiver Mode” section.
Extended Mode ConfigurationThis section continues from Step 4 on page 13 to set an extended HDSL transmission rate.
1If the Operating Mode is set to EXTENDED, skip to Step 3. Otherwise, press Enter.
2Press Next until EXTENDED displays, then press Enter. The LCD displays OPERATING MODE.
3Press Next until LOOP MODE displays, then press Enter.
4Press Next to display either 2 LOOPS or 1 LOOP, then press Enter to select the option displayed. The LCD displays LOOP MODE.
5Press Next until HDSL RATE displays, then press Enter.
6Press Next until the desired HDSL transmission rate displays, then press Enter.
To continue setting up the system, proceed to the “Set the HDSL Transceiver Mode” section.
14 | May 29, 2002 |