Installing and Configuring the Line Unit
SET THE HDSL TRANSCEIVER MODE
The Transceiver Mode option determines the hierarchy of the two Campus units when attempting to establish an HDSL link. There are three settings:
•If a unit is set to Master, it initiates the HDSL link. The other Campus unit must be set to Slave or Auto.
•If a unit is set to Slave, it waits for the other Campus unit to initiate the HDSL link. The other unit must be set to Master or Auto.
•If a unit is set to Auto, it automatically switches between Master and Slave until an HDSL link is established. The setting of the other Campus unit is irrelevant. This is the default setting.
The default setting of Auto Mode is the recommended setting, regardless of the setting of the remote unit. To determine the current Transceiver Mode, or to change the setting:
1Press Escape four times to go to the top level menu.
2 Press Next until HDSL LINK CONFIG & STATUS displays.
3Press Enter. OPERATING MODE displays.
4Press Next until XCVR MODE displays, along with the current setting.
5To change the setting, press Enter.
6Press Next to scroll through the Transceiver Mode options until the desired setting displays.
7Press Enter to select the displayed setting. The LCD displays XCVR MODE and the current setting.
May 29, 2002 | 15 |