ADC DMPS-10CE 3. DMPS-10EXP/CEEXPANSION MODULE

ADCP-50-404 • Issue 2 • November 1998

3. DMPS-10EXP/CE EXPANSION MODULE

The DMPS-l0EXP/CE Expansion Module, as shown in Figure 2, is designed to be installed into the DMPS-10CE Basic Power Supply as dc power requirements expand at an installation. The expansion module receives ac power from the basic shelf and is a completely self- contained power supply in all other respects.

Up to three expansion modules can be mounted into the DMPS-l0CE Power Supply shelf. The shelf requires a single ac power source (190 to 240 Vac, 48 to 62 Hz) to deliver up to 4 dc outputs (via 9-pin cable connectors), each output supplying +5 Vdc, +12 Vdc and –1 2 Vdc. Any input voltage between 190 and 240 volts ac can be accommodated without adjustment to the power supply.

Outputs available from each of the modules (basic plus expansion modules) are +5 Vdc at up to 4.5 Amps, +12 Vdc at up to 1.0 Amp, and –12 Vdc at up to 0.5 Amp.

Regulation is maintained on the respective voltages, keeping them constant to the tolerances shown for the given current ranges:

+5 Vdc ± 5.0% for 0 to 4.5 Amps

+12 Vdc ± 10% for 0 to 1.0 Amps

–12 Vdc ± 10% for 0 to 0.5 Amps

J2

J3

J4E1

J1

8258-A

Figure 2. DMPS-10EXP/CE Expansion Module

Page 3

© 1998, ADC Telecommunications, Inc.